This site is for DEMONSTRATION ONLY Orders will not be fulfilled.

  • (714)555-1212

2017 Husqvarna TX 300

2017 Husqvarna TX 300
White
MSRP: $9,199.00
Manufacturer: Husqvarna
Condition: New

Description

Completely new for 2017, the TX 300 signifies the constant development and secure future of the historic 300cc 2-stroke in the Husqvarna off-road line-up. With a newly designed chassis based on the new generation 2016 FC and TC models, the TX 300 is a purpose-built closed course racing 2-stroke with off-road specific features. A larger fuel tank, an 18-inch rear wheel and a side-stand increase the ability and usability of the TX for its intended purpose. Additionally, the lightweight 2-stroke engine is efficienct, centralizes mass and features very little vibration thanks to a counter balancer shaft. As a result the TX 300 now offers a refined and manageable closed course racing package.

Specifications

Engine

Design
1-cylinder, 2-stroke engine
Displacement
293.2 cm³
Bore
72 mm
Stroke
72 mm
Starter
Kick and electric starter
Transmission
6-speed
Primary drive
26:73
Secondary gear ratio
13:50
Clutch
Wet, multi-disc clutch, Magura hydraulics
EMS
Kokusan
 

Chassis

Frame design
25CrMo4 steel central-tube frame
Front suspension
WP-USD, AER 48, Ø 48 mm
Rear suspension
WP shock absorber with linkage
Suspension travel (front)
310 mm
Suspension travel (rear)
300 mm
Front brake
Brembo twin-piston floating calliper, brake disc
Rear brake
Brembo single-piston floating calliper, brake disc
Front brake disc diameter
260 mm
Rear brake disc diameter
220 mm
Chain
5/8 x 1/4"
Steering head angle
63.9 °
Wheelbase
1485 ± 10 mm
Ground clearance
370 mm
Seat height
960 mm
Tank capacity (approx.)
10 l
Weight without fuel
98.4 kg
 

Features

Engine

  • The 300cc 2-stroke engine has for long been the best combination of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-stroke motor has made it a favorite amongst riders for generations. The TX 300 features an advanced construction with shaft arrangements aimed at centralizing oscillating mass. A counter balancer shaft reduces vibration while a twin-valve controlled power valve ensures optimal performance

Transmission

  • A 6-speed semi-close ratio gearbox compliments the off-road usage of the TX 300. An innovative shift lever reduces dirt build up guaranteeing easy operation in even the toughest conditions.

Crankcases

  • The TX 300 engine is designed with mass centralization as a key theme. As a result the lightweight, die-cast engine cases are developed to accommodate the specific location of shaft arrangements. Additionally the counter balancer shaf

Carburettor

  • The TX 300 features a 38mm flat slide Mikuni TMX carburettor. This carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the carburettor has minimal sensitivity to changes in temperature and altitude which reduces the need for setting changes in different conditions.

Chromoly steel frame

  • The hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex which best benefit handling and suspension functionality. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability.

Composite carbon fibre subframe

  • The composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care is taken to create a certain rigidity for optimal handling and rider ergonomics.

WP AER 48

  • The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air pump needed to adjust air pressure in the fork will be provided as standard.

WP rear shock

  • The WP DCC rear shock is designed to provide advanced damping characteristics while conforming to a compact and lightweight design. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and progression with a rear wheel travel of 300 mm.

Pro Taper handlebar

  • The Pro Taper handlebar is second to none for function and style. Manufactured to exacting standards, the Pro Taper handlebar features class-leading fatigue resistance while adding minimal weight. The Pro Taper logos are chemically applied and are scratch and peel resistant. The large Husqvarna bar pad has optimal impact resistance, while the standard handguards offer maximum roost protection.

Brembo brakes

  • Class-leading Brembo calipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in any condition. 260mm disc front and 220mm rear.

Magura hydraulic clutch

  • The reliable, high quality, German-made clutch system guarantees even wear, near maintenance-free operation and perfect modulation in every condition. Meaning that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information