This site is for DEMONSTRATION ONLY Orders will not be fulfilled.

  • (714)555-1212

2017 Husqvarna FE 350

2017 Husqvarna FE 350
White
MSRP: $10,499.00
Manufacturer: Husqvarna
Condition: New

Description

The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control.

Specifications

Engine

Design
1-cylinder, 4-stroke engine
Displacement
349.7 cm³
Bore
88 mm
Stroke
57.5 mm
Starter
Electric starter
Transmission
6-speed
Clutch
Wet, DDS multi-disc clutch, Magura hydraulics
EMS
Keihin EMS
 

Chassis

Frame design
25CrMo4 steel central-tube frame
Front suspension
WP-USD Xplor 48 with preload adjuster
Rear suspension
WP shock absorber with linkage
Suspension travel (front)
300 mm
Suspension travel (rear)
330 mm
Front brake
Brembo twin-piston floating calliper, brake disc
Rear brake
Brembo single-piston floating calliper, brake disc
Front brake disc diameter
260 mm
Rear brake disc diameter
220 mm
Chain
X-Ring 5/8 x 1/4"
Steering head angle
63.5 °
Ground clearance
370 mm
Seat height
970 mm
Tank capacity (approx.)
8.5 l
Weight without fuel
109.3 kg
 

Features

Engine

  • The new DOHC 350cc engine is second to none in terms of versatility. Sharing much of its architecture with the FE 250 engine, the FE 350 is delivers a significant boost of power and torque giving its lightweight character 450-rivalling power. The new design is now 20mm shorter and 0.7 kg lighter than its predecessor weighing in at only 28.5 kg with an electric starter.

Crankshaft

  • The new crankshaft is not only stiffer but also features a shorter connecting rod. The shorter stroke allows the engine to rev more freely resulting in a quick and responsive power delivery. The plain big end bearing features two force-fitted bearing shells ensuring maximum reliability and durability, guaranteeing long service intervals of 135 hours.

Crankcase

  • The crankcase is engineered to house the shaft arrangements at the ideal centre of gravity. The clutch shaft position has moved 11.1mm back and 26.9mm up making the engine 20mm shorter in total. The casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.

Integrated cooling system

  • The radiators are expertly crafted by WP Performance Systems using high strength aluminium. CFD (computational fluid dynamics) is utilized to channel air through the radiators more efficiently and provide optimal cooling in all conditions. The cooling system is integrated into the frame increasing heat dissipation by channelling coolant through the frame while eliminating the need for additional hoses. Additionally, the radiator protectors do not only protect against flying debris but also act as a brace divert any energy from an impact around the radiator and into the frame.

Chromoly steel frame

  • While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor.

Composite carbon fibre subframe

  • The composite subframe is a design unique to Husqvarna motorcycles showcasing pioneering technology and innovation. This 3 piece component is made up of 30% carbon fibre making it remarkably light (1.4 kg) saving 1 kg over the previous design. Specific care is taken to create a calculated rigidity for optimal handling and rider ergonomics.

Magura hydraulic clutch

  • The FE 350 now features a new Magura hydraulic clutch system . The high quality German-made clutch system guarantees perfect modulation of the clutch in every condition. This means that the play is constantly compensated so that the pressure point and the function of the clutch remain identical in cold or hot conditions and over time. The Magura clutch also features even wear characteristics and is nearly maintenance-free.

Brembo brakes

  • Class-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling.

CNC machined triple clamps

  • The 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps have been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information