This site is for DEMONSTRATION ONLY
Orders will not be fulfilled.

2016 KTM 350 XCF-W

2016 KTM 350 XCF-W
Orange/White
MSRP: $9,699.00
Manufacturer: KTM
Condition: New

Description

The 350 XCF-W is the ultimate machine when four-stroke rideability and maximum enduro performance are called for. Thanks to its compact, powerful DOHC engine, its low weight and its perfectly tuned suspension, this machine masters each and every tough spot in cross-country riding with ease. And thanks to its excellent handling, it always holds the advantage when the going gets tough. The longer the distance, the more the rider benefits from this, pros and beginners alike.

Specifications

ENGINE

DESIGN
1-cylinder, 4-stroke engine
DISPLACEMENT
349.7 cm³
BORE
88 mm
STROKE
57.5 mm
STARTER
Kick and electric starter
TRANSMISSION
6-speed
PRIMARY DRIVE
24:73
SECONDARY GEAR RATIO
13:52
CLUTCH
Wet, DDS multi-disc clutch, Brembo hydraulics
EMS
Keihin EMS
 

CHASSIS

FRAME DESIGN
Chrome-molybdenum steel central-tube frame
FRONT SUSPENSION
WP USD Ø 48 mm
REAR SUSPENSION
WP PDS shock absorber
SUSPENSION TRAVEL (FRONT)
300 mm
SUSPENSION TRAVEL (REAR)
335 mm
FRONT BRAKE
Disc brake
REAR BRAKE
Disc brake
FRONT BRAKE DISC DIAMETER
260 mm
REAR BRAKE DISC DIAMETER
220 mm
STEERING HEAD ANGLE
63.5 °
WHEELBASE
1482 ± 10 mm
GROUND CLEARANCE
345 mm
SEAT HEIGHT
970 mm
TANK CAPACITY (APPROX.)
8.5 l
WEIGHT READY TO RACE (WITHOUT FUEL)
107.2 kg
 

Features

250 AGILITY WITH 450 POWER

  • CRANKSHAFT The 350 XCF-W has a heavier crankshaft in order to achieve a more even power delivery and better traction through the greater gyrating mass. The crankshaft employs a plain big end bearing, and two force-fitted bearing shells run directly on the crank pin. The necessary oil feed for this bearing is ensured by the engine's pressure lubrication. This design increases the engine's long-term durability and lengthens crankshaft service intervals, which is a customer benefit in terms of time, effort and cost.
  • ENGINE The 350cc 4-stroke engine with a state-of-the-art electronic fuel injection system offers a very wide power band and is distinguished by a dynamic but fatigue proof power delivery. At over 45hp of maximum power, the 350 XCF-W is strong enough to beat any 450 in it's class.
  • TRANSMISSION The 6-speed gearbox is specially matched to the power delivery of the 350cc engine and any kind of off-road duty. It is distinguished by easy and precise shifting.
  • CYLINDER HEAD The DOHC cylinder head contains four ultra-lightweight titanium valves (intake 36.3mm, exhaust 29.1mm), activated by two overhead camshafts via very small, DLC coated followers that weigh only 8g. The super lightweight design allows for extremely high engine speed levels of up to 12,000 rpm. The camshaft timing is perfectly tuned for performance in low end for Enduro specific performance.
  • ENGINE MANAGEMENT SYSTEM (EMS) The Engine Management System by Keihin with electronic fuel injection via a 42mm throttle body ensures a snappy response and maximum engine performance. An oil-cooled 196 W alternator provides sufficient energy for the fuel injection, lighting and other electrical loads. With an optional map-select switch from the Power Parts program, the EMS can allow the rider to select different engine characteristics. In addition, the optional User-Setting-Tool provides the ability to readout engine data with a laptop and change the ignition and injection mapping with just a few mouse clicks.
  • DDS CLUTCH The one-piece basket of the DDS clutch (damped diaphragm steel) is machined from solid high-tensile steel in one solid part together with the primary drive gear. This process guarantees unbeatable reliability and, together with the thin steel linings, contributes to the narrow engine width due to a compact rivet-less design. The diaphragm spring makes it possible to implement an additional rubber damping system inside the clutch hub, ensuring reliability for the transmission and excellent traction. Finally, the hydraulic clutch mechanism by Brembo in conjunction with the diaphragm spring provides a very light clutch operation and controllable modulation.
  • GENERATOR The 350 XCF-W engine is equipped with a 196 W alternator with integrated starter freewheel. The alternator provides sufficient energy for the fuel injection, lighting and other electrical loads. The oil-cooled rotor has a larger diameter with a bigger flywheel mass and is contained in a larger ignition cover.
  • STARTER The 350 XCF-W is equipped with a kick-starter as well as electric starter as standard. The electric starter is well protected behind the cylinder.
  • VALVE TRAIN The crankshaft drives an intermediate multifunctional shaft on the side, which in turn drives the coolant pump and the two camshafts via the cam chain, while also acting as a counter balancer. A hydraulic chain tensioner ensures reliable chain tension to achieve highly precise valve timing

BODYWORK

  • AIRBOX The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired.
  • GRAPHICS New graphics with clear lines visually underscore the exacting standards of what KTM deems a true, cutting-edge off-road bike
  • BODYWORK The bodywork has been designed ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail.
  • SPEEDO The speedometer by MAE integrates all the warning and indicator lights in a single unit. This gives the cockpit a clean and minimal look, with clear and readily available information.
  • HANDLEBAR All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection.
  • FUEL TANK The large capacity fuel tank is constructed of lightweight polyethylene and specifically designed for off-road use. A ¼-turn bayonet filler cap features a release mechanism for quick and easy refueling.

SUPERIOR CHASSIS

  • COOLING SYSTEM KTM's proven integrated cooling system routes the coolant from the cylinder head through the frame triangle directly to the aluminum radiators made by WP.
  • SWINGARM The cast aluminum swingarm has been developed with state-of-the-art calculation and simulation software and constructed for minimum weight, optimum stiffness and precisely defined flexibility.
  • EXHAUST SYSTEM Light and robust. The aluminum silencer on all XC-W models are renowned for their outstanding performance, while keeping noise to a level well within FIM rules.
  • SUSPENSION/DAMPING The KTM 350 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to the upper side of the swingarm. A wide range of setting options for rebound damping and high- and low-speed compression damping are standard and can be adjusted to suit racing and trail conditions.
  • FRAME The modern frame design of the 350 XCF-W, comprising lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. This guarantees easy handling and precise steering behavior, as well as excellent ride stability. It clearly represents the benchmark in terms of weight and stability. Thanks to the frame design and the rear PDS damping system, impacts at the rear wheel are absorbed and dissipated optimally. For 2016 the frame is protected by a new, robust skidplate.
  • TRIPLE CLAMPS The high-end CNC machined triple clamps have been specifically designed for off-road use and ensures precise handling thanks to precision clamping of the fork legs. The rider receives precise feedback from the front wheel, even in the toughest terrain, thereby increasing riding safety and speed.

WHEELS AND BRAKES

  • BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in off-road, they are unchanged for 2016.
  • WHEELS The black colored aluminum Giant rims with black spokes are mated to CNC machined hubs and lightweight aluminum nipples to achieve maximum stability at minimum weight. These high quality, lightweight black rims have been developed for KTM and offer top performance when fitted with the new Dunlop GEOMAX AT81 tires on all XC-W models.
  • FRONT AXLE The front axle has been reduced in size from 26mm to 22mm to reduce weight and offer better front end feel. The adjusted offset from 35mm to 33mm increases trail and provides more stability.
  • FRONT FORK GUARDS The fork protectors have been adapted to the fork shoes and are also lighter. The open design offers the same level of protection while giving easier access to the fork legs for quicker cleaning and faster maintenance.

All inventory listed is subject to availability and prior sale. Manufacturer's Suggested Retail Price (MSRP) if shown for a vehicle excludes set-up, freight, taxes, title, licensing or other dealer charges, and is subject to change. Individual prices may vary. Please request a quote for specific pricing.

Request Quote or More Information








Social Connections
Newsletter
Subscribe to our newsletter to receive our special email offers and more.

Demo by vNext Technologies
10805 Holder St. Ste 167
Cypress, CA 90630
p: (714) 676-8580